All posts
How Moveee works ·18 November 2026 · 6 min read

Indoor FTP: what it is, and how Moveee sets yours

The Moveee team

Free coaching · a real route for every ride

If you train with power, you've probably noticed the trainer numbers come out a little lower than the road numbers. The usual fix is an "indoor FTP": a second, slightly lower FTP that your indoor sessions use. Here's what it is, when it makes sense, and how Moveee handles it.

What an indoor FTP is

Your FTP is the power you can hold for about an hour. It's a fact about your body, and your body doesn't change when you carry the bike into the garage. What changes is the setting: no cooling wind, no road to chase, and often a different power source. And in ERG the trainer holds the watts: no coasting, no change in terrain, so your legs get a steady load with no let-up instead of the short breaks a road gives. As we covered in what the research says about indoor power, most trained riders hold about 3–6 % less on a trainer, some much more without a fan, and a few no less at all.

So an indoor FTP isn't a different fitness. It's the number that matches what you can actually hold where you're riding. Train to your outdoor number indoors and threshold sessions become a bit harder than they were designed to be. Do that for a winter and you fail sessions you should finish, or finish them more tired than the plan expects.

Fix the cause first

Before you lower anything, check the two things that cause most of the gap and can be fixed: cooling and measurement. A strong fan, a cool room and one power source for inside and out close a big part of it for many riders. That's in fans, room temperature and power matching. Whatever is left after that is your real indoor gap.

How Moveee does it

Moveee shows an Indoor FTP next to your FTP, in watts. Under the hood it's your FTP times your own indoor factor, so your plan still runs on one FTP, and when your FTP goes up, your Indoor FTP follows.

Starts at 96 % of your FTP

A middle-of-the-road figure from the research: trained riders usually hold 3–6 % less indoors.

Only from sweet spot up

Sweet spot, threshold, VO2max and harder blocks use your Indoor FTP. Endurance and recovery stay at 100 %.

Yours to change

Shown in watts next to your FTP in Settings → Rider. Set it there (85–105 % of FTP), or tell the coach.

Learns from your rides

Moveee compares your best efforts indoors and outside and suggests a new number, at most 2 % a month.

Never applied silently

A session only changes after you confirm it on the indoor card. You can undo it any time.

Why 96 %

The studies don't agree on one number. Pros in Lipski et al. were about 4–9 % lower indoors; trained riders in two time-trial studies were 1–3 % lower, too small to be sure. Riders going by feel without a fan held 20–30 % less. A trained rider with a decent fan sits somewhere in the low single digits. 96 % is a cautious middle: enough to make threshold work doable indoors, not so much that you train too easy. It's an estimate, and we say so on the card.

Why only sweet spot and up

The gap matters most where you're near your limit. At endurance pace you aren't fighting for every watt, and lowering those targets would just make an easy ride easier. So endurance and recovery blocks stay exactly as planned, and only the blocks from sweet spot upwards change.

Why it asks first

What you see on the calendar is what you ride. So your Indoor FTP never changes a session in the background. When you mark a session indoor, or open it in Moveee Indoor, a card shows the original targets next to the indoor ones and why they differ. Only when you accept does the session itself change, and ERG in Moveee Indoor then holds the new targets. Keep the original if you'd rather, or undo it later. How the card works is explained in how Moveee adapts your training indoors.

Finding your own number

The default is a starting point. Your own gap is what counts, and Moveee learns it from your rides. Each week where you have a hard indoor ride and a hard outdoor ride, it compares your best 5- and 20-minute efforts. When your indoor numbers sit clearly lower or higher over six weeks, it suggests a new Indoor FTP as a card, for example "Your Indoor FTP: 288 → 282 W, based on your last rides". It moves at most 2 % a month, needs at least three matched efforts before going more than 2 % from the default, and below 90 % of FTP it asks you to check your power meter and fan first. Nothing changes until you press Use.

You can also find it yourself:

  1. Compare like with like. A hard 5- or 20-minute effort indoors and one outside, within a couple of weeks, on the same power meter.
  2. Watch how sessions go. Threshold intervals at 96 % that still feel out of reach, with a good fan and a cool room, mean your Indoor FTP should come down a little. Ones that feel easy mean it can go up.
  3. Change it in small steps. A few watts at a time, in Settings → Rider, or just tell the coach "indoor feels much harder, lower my Indoor FTP" and it will offer the change for you to confirm.
  4. Be suspicious of big gaps. Under 90 % is unusual. Check the fan, the room and your power meter before settling there.

Set your Indoor FTP equal to your FTP and nothing changes indoors. And if you're one of the riders who goes better on the trainer, it can go above your FTP.

Same session, same training load

Indoor rides are scored against your Indoor FTP. So a session ridden at its indoor targets counts the same training load as the outdoor version: its planned TSS doesn't change, and your fitness doesn't dip just because you rode inside. Each ride keeps the FTP it was scored against, so the numbers stay traceable. The one exception is the shorter long-ride option: it's genuinely less work, so it shows a lower load. If you're wondering whether a shorter indoor ride does the same job as a long one outside, read is an hour indoors worth 90 minutes outside?

Every Moveee training plan comes with an Indoor FTP, set to 96 % of your FTP until Moveee learns yours. Ride a few threshold sessions in Moveee Indoor and you'll soon know whether that number is yours.

Sources 4

Where this article summarises a study, the study itself is linked — not a write-up of it.

  1. 1 Lipski ES, Spindler DJ, Hesselink MKC, Myers TD, Sanders D Differences in performance assessments conducted indoors and outdoors in professional cyclists · International Journal of Sports Physiology and Performance · 2022
  2. 2 Jeffries O, Waldron M, Patterson SD, Galna B An analysis of variability in power output during indoor and outdoor cycling time trials · International Journal of Sports Physiology and Performance · 2019
  3. 3 Smith MF, Davison RC, Balmer J, Bird SR Reliability of mean power recorded during indoor and outdoor self-paced 40 km cycling time-trials · International Journal of Sports Medicine · 2001
  4. 4 Mieras ME, Heesch MWS, Slivka DR Physiological and psychological responses to outdoor vs. laboratory cycling · Journal of Strength and Conditioning Research · 2014
Ride it, don't just read it

Your own roads, indoors, in a browser tab

Moveee Indoor pairs your smart trainer over Bluetooth and rebuilds a route you have saved as a 3D road — real gradients, ERG for the intervals, and the ride saved with full power data. Nothing to install. Free while it is in alpha.

Start an indoor ride

Keep reading

How Moveee works

How Moveee adapts your training when you ride indoors

Mark a session indoor or open it in Moveee Indoor and a card shows what changes and why: which zones move, which don't, and when a long ride is better shorter.

How Moveee works

From a browser tab to Strava: how Moveee Indoor runs a full trainer session

Follow one indoor ride from cold trainer to a Strava post — pairing, ERG intervals, a real 3D road, full power analysis and a one-tap upload — all without installing a thing.

How Moveee works

Power Profile explained: how Moveee places you from sprinter to diesel

Where every number on the Power Profile page comes from: the 3–30 minute Critical Power fit, estimated FTP, thresholds and FatMax, the VO2max regression, the Power Index spider, glitch nets, and lab test uploads.

How Moveee works

How Moveee builds your training plan: what the wizard asks and why

A walk through the plan wizard, question by question: what each answer changes in the engine, how the weekly load budget is set, where hard days land, and what the wizard does not ask.

How Moveee works

Planned vs actual: reading your Moveee calendar after a week of riding

How to read the week banners, the day cells and the four ride verdicts, how a ride is matched to a session, what the check-in does, and the honest gaps: no missed state, and verdicts only on the ride page.

How Moveee works

Route Engine: how Moveee picks the right road for tomorrow's workout

How a planned session becomes a route from your door: the spec, the search for real climbs and flat drags near home, fresh wind-aware loops, fixed scoring weights and templated reasons, plus what it needs and what it cannot do.

How Moveee works

Can you really train indoors in a browser? How Moveee Indoor works in 2026

"In the browser" used to mean toy-grade. Not any more. Here's how a browser now pairs your trainer, holds your watts and renders a real 3D world — and what still needs a native app.

How Moveee works

The check-in emails, and what your answers do (and don't) change

Seven check-in emails, three questions, a 30-day pause when you answer, and a clear line: the survey is read by a person and never edits your plan. The post-ride check-in is the one that does.

How Moveee works

What happens after a hard ride: how an adaptive plan eases your next day

The evening re-tune, step by step: the verdict on your ride, the deviation number, the window it edits, what gets eased and by how much, the card with Undo, and what the adaptive plan does not do.

How Moveee works

From Free to Pro: what changes in your plan the day you upgrade

What Free includes, how the 14-day adaptive trial works, and exactly what switches on when you go Pro: adaptation resumes, the coach unlocks, the caps lift. Nothing is rebuilt.

Training science

Ramp rate: how fast you can add training load without breaking

Every rider who discovers load tracking tries to make the number go up as fast as possible, and a few weeks later is ill. The conventional bands, what actually sets your own limit, and why a build that never comes down is not a build.

Guides

How to use an indoor cycling app without a smart trainer — a speed sensor is enough

A £30 wheel speed sensor turns any dumb trainer into a real route in a 3D world, with the ride saved to your calendar. What you need, how to set it up, and the one thing about hills you should know before your first session.

Klaar om met een plan te fietsen?

Koppel Strava en krijg vandaag nog je eerste blok van drie weken — gratis.

Doorgaan met Strava